The current Openpath Jira and Confluence instances will be migrated to the MSI On-Premise solution from August 9th-11th, the current platform will be set to read-only and all future usage will be in the Avigilon Instance. Please ensure access to MSI Jira & MSI Confluence, both are accessible through OKTA. For additional information and details please refer to the Atlassian migration page

How to create a card/fob credential

Owned by Mihai Peteu (Unlicensed)
Last updated: Sept 16, 2024 by Chad Fay
1 min read

Avigilon Alta Access supports a wide range of key cards and fobs. To use a card or fob, create a Card Credential.

To create a card credential

  1. Go to https://control.openpath.com/login and log in. To access the European Alta Access, please go to https://control.eu.openpath.com/login.

  2. Under Users > Users, click on the name of the user you wish to issue a card credential.

  3. Under the Credentials tab, click Add Credential.

  4. Select the type of card you are issuing:

    1. Card/Fob: Openpath/MIFARE (CSN) - Fast:
      Allows the CSN of any MIFARE-type or ISO14443A card for Entry Access. This method will be fast. Use this selection for Openpath HF key fobs and cards.

    2. Card/Fob: Openpath DESFire (Encrypted) - Secure:
      Allows use of Openpath DESFire cards/Fobs for Entry Access. This method comes with extra security so it will be slower than the CSN method. You can use this selection for Openpath HF cards. 

    3. Card: Wiegand ID:
      Allows use of Wiegand-based cards for Entry Access. Use this selection for Openpath LF key fobs and cards. 

      • If you’re adding a Wiegand credential, you need to specify the card format. For Openpath LF key fobs and cards, select Prox 26-bit (H10301).

      • If you’re unsure of the card format, you can use the Raw 64-bit option and enter the card number. If you’re unsure of the card number, see How do I pull the card number from an unknown card?

      • If you’d like to send card credential data to a third-party control panel, set Use for Gateway to Enabled. You must also configure the Wiegand reader to enable this feature.

  5. Enter the card number found on the card that you are issuing, a start and/or end date (optional), then click Save.