The current Openpath Jira and Confluence instances will be migrated to the MSI On-Premise solution from August 9th-11th, the current platform will be set to read-only and all future usage will be in the Avigilon Instance. Please ensure access to MSI Jira & MSI Confluence, both are accessible through OKTA. For additional information and details please refer to the Atlassian migration page
How to integrate with Nedap uPASS Reach readers
- Liz McFarland (Unlicensed)
- Chad Fay
Nedap uPASS Reach readers use UHF RFID technology. They are often used for long-range vehicle identification in parking garages.
Note: This reader requires external power. Current consumption: 1A @ 12VDC or 500mA @ 24VDC. For more information, refer to the uPASS Reach user guide.
Â
Integrating uPASS Reach readers with Core Series hardware
Wiring uPASS Reach reader with Core Series hardware
Nedapp uPASS Reach | Avigilon Alta Core Series hardware |
|---|---|
OUT2 (D0) | AUX1 (D0) |
OUT3 (D1) | AUX2 (D1) |
GND | GND |
Integrating uPASS Reach readers with first-generation hardware
Wiring uPASS Reach reader with first gen hardware
Nedapp uPASS Reach | Avigilon Alta first gen hardware |
|---|---|
OUT2 (D0) | D0 |
OUT3 (D1) | D1 |
GND | GND |
Integrating uPASS Reach readers with Single Door Controller
Wiring uPASS Reach reader with Single Door Controller (SDC)
Nedapp uPASS Reach | Avigilon Alta SDC |
|---|---|
OUT2 (D0) | D0 |
OUT3 (D1) | D1 |
GND | GND |
Setting up uPASS Reach reader in Alta Access
To configure Wiegand inputs on Core Series hardware:
Go to https://control.openpath.com/login and log in. To access the European Alta Access, please go to https://control.eu.openpath.com/login.
Go to Devices > ACUs, then click on the ACU to edit it.
Click on the Ports tab.
Click Port next to the first input of the I/O pair with the uPASS Reach reader configured.
Select Wiegand Device from the Input Type dropdown, then click Save.
This will label the subsequent input as Wiegand Device (Extended) and disable it from editing. Inputs cannot be changed if they are already assigned to an entry.
Input settings in Alta Access
Once the Wiegand Device is configured on the ACU, it can be assigned to an entry.Â
Assigning a Wiegand Device to an entry
For more information on creating Entries, refer to the Avigilon Alta User Guide.
To add a uPASS Reach reader to an entry:
Go to https://control.openpath.com/login and log in. To access the European Alta Access, please go to https://control.eu.openpath.com/login.
Go to Sites > Entries and click on an existing entry to edit or click the plus(+) on the top right to Create an Entry.
Scroll down to Wiegand Device.
From the Port dropdown, select the port for the uPASS Reach reader to which this entry is wired.
From the Mode dropdown, select Input.
Click Save.