Versions Compared

Old Version 77

changes.mady.by.user Chad Fay

Saved on

compared with

New Version Current

changes.mady.by.user Chad Fay

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Use the Avigilon Alta access control Access system integration with Allegion Schlage® wireless locks and ENGAGE technology to configure and manage wireless locks without gateway hardware.
You can connect Allegion’s NDEB, LEB, and Control™ wireless locks to your Avigilon Alta system in No-Tour Mode by using the ENGAGE app and the Avigilon Alta Access app.

No-Tour mode features

Integrators can install the Allegion Schlage LE version B (LEB) and NDE version B (NDEB) wireless locks in offices and building amenities.

...

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#FFBDAD

Note: Only Schlage Cards or fobs purchased from Avigilon Alta can be used for No-Tour locks.
(Schlage cards/fobs not purchased from Avigilon are not supported.)

See: New Avigilon DESFire EV3 Cards regarding Avigilon No-Tour config card

Avigilon Alta Mobile credentials will work also and are programmed just like regular Avigilon Alta Mobile credentials.

For Mobile Credentials to work, the no-tour lock needs to be toured with the Avigilon Alta Access app before a user can successfully use a mobile credential.

Prerequisites

Install the Schlage app from the App Marketplace and follow the steps to purchase Allegion licenses or contact Avigilon Alta Sales to set up a customer organization with the Allegion licenses. Connecting to a gateway is not required for the offline locks.

...

...


Anchor
mt20w
mt20w
Adding Schlage MT20W enrollment reader to the Allegion ENGAGE site and Control Center Avigilon Alta using the ENGAGE mobile app.

...

Anchor
wirelesslocks
wirelesslocks
Adding Schlage Wireless locks to the Allegion ENGAGE site and Control Center Avigilon Alta using the ENGAGE mobile app.

Info

Note: If during the commission process, something goes wrong, the device name will show as "Captured" in both the Control Center Avigilon Alta and the Engage app, causing syncing to stop. To fix this, delete the device named "Captured", and factory default the device. After factory defaulting, re-add and recommission the device.

...

B. Scan the config card (OP-CE-051-849) on the MT20 Enrollment Reader after commissioning the lock or enrollment reader in the ENGAGE App. This will update the reader config which is required for this integration.

B. Click Sync devices in the Control CenterAvigilon Alta.

Anchor
zone
zone
Create a No-tour zone in the Control Center Avigilon Alta and associate your No-Tour Entries to that zone.

...

Anchor
assign
assign
Assign No-Tour mode locks to entries using Control CenterAvigilon Alta.

Iframe
allowfullscreentrue
srchttps://info.openpath.com/hubfs/Openpath/images/kustomer-articles/no_tour_entry.png
width700
frameborderhide
titleno-tour_entry
alignmiddle
height319
longdescNo-Tour Entry

...

Anchor
credential
credential
Issue user Schlage card or fob credentials using the enrollment reader, and Control CenterAvigilon Alta.

Panel
panelIconIdatlassian-warning
panelIcon:warning:
bgColor#FFBDAD

Note: A maximum of 11 entries across multiple zones in the same customer organization is supported for each Schlage card or fob credential commissioned to the Control Center Avigilon Alta (referred to also as the credential sector limit). The 11-entry limit does not apply to Openpath mobile credentials.

Be sure to have followed steps A, B, and C in Adding Schlage MT20W enrollment reader to the Allegion ENGAGE site and Control Center Avigilon Alta using the ENGAGE mobile appabove before you proceed.

...

Anchor
entry
entry
Assign entries to users using Control CenterAlta Access.

Info

Note: Avigilon Alta does NOT recommend using groups with No-Tour.

...