...
After provisioning, return to the Control Center to finish configuring video settings or to enable ONVIF.
Configure Video Settings
To edit video settings:
Go to Devices > Video readers or Video intercom readers, then click on the device to edit.
Click the Video tab to adjust video settings.
Under Video Properties, select High, Medium, or Low Quality.
Adjust Brightness, Contrast, Saturation, and Sharpness as needed.
Wide Dynamic Range (WDR) is disabled by default; enabling it to adjust for backlighting and other extreme lighting conditions.
Night Mode is set to Auto by default, but you can also set it to Always on or Always off.
Anti-Overexposure is enabled by default; when enabled this helps reduce IR glare on persons and objects approaching the Video Reader.
Under Detection Settings, enable or disable Motion Detection and adjust sensitivity settings.
In the live video feed, create privacy masks or regions of interest, if needed.
...
To continue with the Video Intercom Reader Pro please see Setup and Features.