The current Openpath Jira and Confluence instances will be migrated to the MSI On-Premise solution from August 9th-11th, the current platform will be set to read-only and all future usage will be in the Avigilon Instance. Please ensure access to MSI Jira & MSI Confluence, both are accessible through OKTA. For additional information and details please refer to the Atlassian migration page

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Prerequisites

To set up the Milestone VMS integration, you'll need to log into the Control Center, go to Integrations > All Integrations and click on the Milestone tile. Download and install Microsoft .NET 4.8, ACX, and Milestone Plugin. 

To set up the Avigilon Alta integration on the Milestone server:

  1. Run the Openpath_ACX_Plugin exe

  2. Find the Openpath_ACX exe and run as administrator

  3. Change the following settings under Milestone Configuration:

    • image4.png

      Local port is required, and it must match the port defined in the Milestone Access Control settings

    • Remote host is required, and it must be the IP address of the machine that is running the event server

    • Milestone plugin has two settings, October-2019 or Before October-2019—select the appropriate version for your setup

  4. Change the following settings under Avigilon Alta Configuration:

    image5.png
    • User and Pass are required. Enter the login credentials of an Avigilon Alta Super Admin user. Avigilon Alta recommends creating a dedicated user for this purpose.

  5. Click Save then Close

Milestone Management Client Configuration:

  1. Go to Site Navigation

    image1.png
  2. Right-click on Access Control and click Create New

    1. Note: Leave User name and Password as the default. Ensure the Port field matches the ACX Plugin.

  3. image6.png

    Click Next and follow the prompts to tie cameras to doors

  4. Restart Milestone Event Server, then open Openpath_ACX exe and confirm everything is connected:

  5. image2.png

    Open XProtect Client. There should be an Access Control tab in the client now, and you can add information to live views as well.

    image3.png
  • No labels