In the Open Admin app, you can configure network settings for the Single Door Controller (SDC). While wired Internet connections are preferred, you can configure the SDC to use Wi-Fi instead. The default interface for the SDC is Ethernet/wired connection. Ethernet and Wi-Fi connections can be DHCP (default) or can have a static IP address.

To set up Wi-Fi on the SDC using the Admin App:

1. Connect to the SDC by pressing the Admin button again if needed

2. Tap on Network Settings

3. Tap on Wi-Fi IP Settings

4. Enable Default Interface

5. Tap on Pick Wi-Fi Network

6. Choose your network and enter your password then tap Connect