Firewall
An Ethernet connection with DHCP must be used to connect the Smart Hub (ACU) or Single Door Controller (SDC) to the Local Area Network (LAN). You also need to configure firewall settings to communicate with the Avigilon Alta system. Avigilon Alta uses the following outbound ports:
TCP port 443
UDP port 123
Note: Fortinet firewall has antivirus software pre-configured to run on the firewall. That Antivirus blocks all AWS traffic by default. AWS will need to be whitelisted.
NOTE: If using an external DNS server, outbound UDP port 53 must also be open.
To support Wi-Fi unlocking from the mobile app, the ACU/SDC's inbound TCP port 443 must be available from within the LAN. Inbound port forwarding on the router, firewall, or NAT device is unnecessary.
We do not allow HTTPS certificate rewriting or TSL/SSL inspection.
IP Address
We do not provide an IP range or FQDN list of Avigilon Alta hostnames for Basic and Premium licenses. Most hostnames resolve to dynamic IPs and the hostnames themselves change during provisioning and configuration update processes. If you wish to segregate traffic from your Avigilon controllers, you can enable a DMZ for the controllers to separate their traffic.
Static Cloud IP
For Enterprise Licenses we offer a Static Cloud IP. This allows organizations with strict network firewall policies to easily open only a few IP addresses to allow Alta Access hardware (ACU/SDC) to connect to the cloud.
This release includes a new version of the Openpath Admin app, which allows for the provisioning of ACU/SDC devices behind an already restricted firewall.
Video Reader / Video Intercom Reader network security best practices
Protecting edge devices
PoE access control readers, like the Video Reader Pro / Video Intercom Reader Pro, require a wired network connection installed on the unsecured side of a door. To remove the risk of an attacker gaining access to the local network via the network connection if they’re able to remove the reader from the wall, Avigilon Alta recommends that your IT team place the exposed Ethernet port on a demilitarized zone (DMZ) or perimeter network.
Improving network reliability
To improve reliability during some network outage conditions (such as a router outage), you should set static IPs on both the Video Reader Pro and its Remote ACU(s).
Information: Recommended upload speeds for 1 Video Reader Pro or Video Intercom Reader Pro.
(Double for each added Video Reader, Video Intercom reader)
Quality:
Low: 1Mb
Medium: 2Mb
High: 8Mb
We recommend more for the Video Intercom Reader Pro because Live streaming and Video Calls require more bandwidth since they can be used simultaneously.
0 Comments