Prerequisites
To set up the Milestone VMS integration, you'll need to log into the Control Center, go to Integrations > All Integrations and click on the Milestone tile. Download and install Microsoft .NET 4.8, ACX, and Milestone Plugin.
To set up the Openpath integration on the Milestone server:
Run the Openpath_ACX_Plugin exe
Find the Openpath_ACX exe and run as administrator
Change the following settings under Milestone Configuration:
Local port is required, and it must match the port defined in the Milestone Access Control settings
Remote host is required, and it must be the IP address of the machine that is running the event server
Milestone plugin has two settings, October-2019 or Before October-2019—select the appropriate version for your setup
Change the following settings under Openpath Configuration:
User and Pass is required. Enter the login credentials of an Openpath Super Admin user. Openpath recommends creating a dedicated user for this purpose.
Click Save then Close
Milestone Management Client Configuration:
Go to Site Navigation
Right-click on Access Control and click Create New
Note: Leave User name and Password as the default. Ensure the Port field matches the ACX Plugin.
Click Next and follow the prompts to tie cameras to doors
Restart Milestone Event Server, then open Openpath_ACX exe and confirm everything is connected:
Open XProtect Client. There should be an Access Control tab in the client now, and you can add information to live views as well.
0 Comments