The current Openpath Jira and Confluence instances will be migrated to the MSI On-Premise solution from August 9th-11th, the current platform will be set to read-only and all future usage will be in the Avigilon Instance. Please ensure access to MSI Jira & MSI Confluence, both are accessible through OKTA. For additional information and details please refer to the Atlassian migration page

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

You can configure Anti-Passback to use in and out (entry and exit) readers by configuring two entries with two Openpath readers and two relays sharing one lock.

To configure the hardware:

  1. Install two Openpath readers, one on either side of the door (or turnstile, parking gate, etc.)

  2. Connect the readers and lock to the Openpath ACU

  3. In this example, the following are connected to the 4-Port Board:

    1. The in/entry Openpath Reader is connected to READER 1

    2. The out/exit Openpath Reader is connected to READER 3

    3. The lock is connected to RELAY 1

    4. RELAY 3 is connected to REX 1 (which will trigger RELAY 1)

To configure the entries in the Control Center:

  1. Go to https://control.openpath.com/login and log in. To access the European Control Center, please go to https://control.eu.openpath.com/login

  2. Go to Sites > Entries and create two entries (billing charges may apply)

    1. Click the plus(+) sign in the top right corner to Create an Entry

    2. Give the entry a name, assign a zone, and select the Controller you just configured

    3. Under Entry/Exit Hardware, select Relay 1

    4. Under Openpath Reader, select Reader 1

    5. Click Save

    6. Repeat these steps for the Out Reader, selecting Relay 3 and Reader 3

  3. To configure an Anti-Passback Area, refer to How do I enable Anti-Passback and Occupancy Management?

  • No labels