There are two ways to install the Standard Keypad Reader; flush mounted on a single gang box or surface mounted using the provided backplate. The Mullion Keypad Reader can only be surface mounted. It is perfect when space is limited, such as a door frame.
Mounting Instructions
Standard Keypad Reader Installation - Flush Mount
Install a recessed single gang box (D) into the wall
Strip and connect the wires
Use the #6-32 screws (B) to attach the reader (C) to the wall. Do not use the provided back plate for flush mount installations.
Snap on the front cover (A). Do not use adhesive.
Standard Keypad Reader Installation - Surface Mount
Attach the back plate to the wall.
On drywall: use wall anchors and appropriate screws.
On a UK single gang box: use four machine screws (not included).
On a German single gang box: use two machine screws (not included) on the top and bottom holes.
Strip and connect the wires.
Use the #8-32 screws (B) to attach the reader (C) to the back plate.
Snap on the front cover (A). Do not use adhesive.
Mullion Keypad Reader Installation
Strip and connect the wires.
If installing on a metal surface, drill and tap to use the provided machine screws (B). Or, use self-tapping screws.
Attach the reader (G) to the wall.
Snap on the front cover (F). Do not use adhesive.
Wiring Information
After installing the Keypad Reader, check out the How to Program the Keypad Reader in the Control Center guide to complete the installation.
Related Articles:
How to create an entry for the Openpath Keypad Reader
How to program the Keypad Reader in the Control Center
Add Comment