There are two ways to install the Standard Keypad Reader; flush mounted on a single gang box or surface mounted using the provided backplate. The Mullion Keypad Reader can only be surface mounted. It is perfect when space is limited, such as a door frame.
Mounting Instructions
...
| Iframe | ||||
|---|---|---|---|---|
|
...
|
Standard Keypad Reader Installation - Flush Mount
Install a recessed single gang box (D) into the wall.
Strip and connect the wires.
Use the #6-32 screws (B) to attach the reader (C) to the wall. Do not use the provided back plate for flush mount installations.
Snap-on the front cover (A). Do not use adhesive.
...
| Iframe | ||||
|---|---|---|---|---|
|
...
|
Standard Keypad Reader Installation - Surface Mount
...
Attach the back plate to the wall.
On drywall: use wall anchors and appropriate screws.
On a UK single gang box: use four machine screws (not included).
On a German single gang box: use two machine screws (not included) on the top and bottom holes.
Strip and connect the wires.
Use the #8-32 screws (B) to attach the reader (C) to the back plate.
Snap-on the front cover (A). Do not use adhesive.
...
| Iframe | ||||
|---|---|---|---|---|
|
...
|
Mullion Keypad Reader Installation
Strip and connect the wires.
If installing on a metal surface, drill and tap to use the provided machine screws (B). Or, use self-tapping screws.
Attach the reader (G) to the wall.
Snap-on the front cover (F). Do not use adhesive.
Wiring Information
...
| Iframe | ||||
|---|---|---|---|---|
|
...
|
After installing the Avigilon Keypad Reader, check out the How to Program the Avigilon Keypad Reader in the Control CenterAvigilon Alta Access guide to complete the installation.
Related Articles:
How to create an entry for the Openpath Avigilon Keypad Reader