You can power the Single Door Controller (SDC) using PoE+, PoE, or an external 12V-24V supply. Openpath Avigilon Alta recommends using PoE+/PoE for a few reasons:
You simplify cabling by using one cable for both power and data
You can use the POWER IN on the SDC for a backup battery
SDC power specifications
Operating Voltage: 12-24VDC
...
Assuming an external 24V power supply, an SDC configured with two Openpath Avigilon Readers and locking hardware uses about 1.1 Amps. To keep the system running for 3 hours with all entries engaged, you need 1.1A x 3 hours = 3.3 AH, so two 12V 4AH sealed lead acid (SLA) or gel cell batteries in series.
...