Versions Compared

Old Version 26

changes.mady.by.user Chad Fay

Saved on

compared with

New Version Current

changes.mady.by.user Chad Fay

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

https://www.youtube.com/watch?v=9PPCH871O_M

Information: Recommended upload speeds for 1 Video Reader Pro or Video Intercom Reader Pro.

(Double for each added Video Reader, Video Intercom reader)

Quality:

Low: 1Mb

Medium: 2Mb

High: 8Mb

We recommend more for the Video Intercom Reader Pro because Live streaming and Video Calls require more bandwidth since they can be used simultaneously.

Prerequisites

Create a Video reader/Video intercom reader in the Control Center prior to Alta Access before installing and provisioning.

Installation

You can install the Video Reader Pro/Video Intercom Reader Pro on a narrow surface using the mullion mount or on a single gang box using the standard mount.

...

Iframe
allowfullscreentrue
srchttps://info.openpath.com/hubfs/images/kustomer-articles/video-reader-standard-mount.png
width400
frameborderhide
titlestandard-mount
alignmiddle
height539
longdescvideo-reader-standard-mount

Wiring the Video Reader Pro/Video Intercom Reader Pro

Iframe
allowfullscreentrue
srchttps://info.openpath.com/hubfs/images/kustomer-articles/video-reader-wiring.png
width400
frameborderhide
titlevideo-reader-wiring
alignmiddle
height145
longdescvideo-reader-wiring

...

Info

Note: *Relay not rated for locking hardware. To power locking hardware, use an Openpath Avigilon Smart Hub or third-party access control panel.

Provisioning the Video Reader Pro/Video Intercom Reader Pro

Note: You must first create a device in the Control Center Alta Access before provisioning.

Using the Open Admin Alta Access app:

  1. Open the Admin Alta Access app.

  2. Search for the org name.

  3. Press the Admin button on the back of Video Reader Pro.

    1. A SIM card removal tool is useful for this.

  4. Tap the serial number of the device in the Admin app.

  5. Here, you can select if you are using DHCP or Static IP by choosing Network Settings. Select Configure network manually to configure a Static IP. Once configured, click Save in the top right corner and proceed.

  6. Tap Provision in the Admin app and follow the in-app instructions.

Using the Control CenterAvigilon Alta Access:

  1. Go to https://control.openpath.com/login and log in. To access the European Control CenterAlta Access, please go to https://control.eu.openpath.com/login.

  2. Go to Devices > Video readers or Video intercom readers.

  3. Press the Admin button on the back of the device.

    1. A SIM card removal tool is useful for this.

  4. In the Control CenterAlta Access, click the Register button.

...