Versions Compared

Old Version 11

changes.mady.by.user Chad Fay

Saved on

compared with

New Version Current

changes.mady.by.user Chad Fay

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Iframe
allowfullscreentrue
srchttps://info.openpath.com/hubfs/Openpath/images/kustomer-articles/flush_mount.png
width522
frameborderhide
titleflush mount
alignmiddle
heighttitle309flush mount
longdescflush mount Openpath keypad
height309

Standard Keypad Reader Installation - Flush Mount

  1. Install a recessed single gang box (D) into the wall.

  2. Strip and connect the wires.

  3. Use the #6-32 screws (B) to attach the reader (C) to the wall. Do not use the provided back plate for flush mount installations.

  4. Snap-on the front cover (A). Do not use adhesive.

Iframe
allowfullscreentrue
srchttps://info.openpath.com/hubfs/Openpath/images/kustomer-articles/surface_mount.png
width514
frameborderhide
titlesurface mount
alignmiddle
heighttitle248surface mount
longdescsurface mount Openpath Keypad
height248

Standard Keypad Reader Installation - Surface Mount

  1. Attach the back plate to the wall.

    1. On drywall: use wall anchors and appropriate screws.

    2. On a UK single gang box: use four machine screws (not included).

    3. On a German single gang box: use two machine screws (not included) on the top and bottom holes.

  2. Strip and connect the wires.

  3. Use the #8-32 screws (B) to attach the reader (C) to the back plate.

  4. Snap-on the front cover (A). Do not use adhesive.

Iframe
allowfullscreentrue
srchttps://info.openpath.com/hubfs/Openpath/images/kustomer-articles/mullion_keypad.png
width293
frameborderhide
titlemullion mount
alignmiddle
heighttitle259mullion mount
longdescMullion Mount Openpath Keypad
height259

Mullion Keypad Reader Installation

  1. Strip and connect the wires.

  2. If installing on a metal surface, drill and tap to use the provided machine screws (B). Or, use self-tapping screws.

  3. Attach the reader (G) to the wall.

  4. Snap-on the front cover (F). Do not use adhesive.

...

Iframe
title
allowfullscreentrue
srchttps://info.openpath.com/hubfs/Openpath/images/kustomer-articles/wiring_keypad.png
width568
frameborderhide
wiring keypadalignmiddle
heighttitle321wiring keypad
longdescWiring Openpath Keypad
height321

After installing the Openpath Avigilon Keypad Reader, check out the How to Program the Openpath Avigilon Keypad Reader in the Control CenterAvigilon Alta Access guide to complete the installation.

Related Articles:

How to create an entry for the Openpath Avigilon Keypad Reader

Openpath Avigilon Keypad Reader FAQs