Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Issue:

Anchor
unlocks
unlocks
Unlocks for the intercom not triggering the door (or blue LED on intercom)

...

Anchor
false
false
False Touches

What to check:

  • In some installations utilizing wave to unlock, it may be possible that false touches may occur. If this occurs, you should modify the sensitivity of the Wave Detection Range under Sites > Entries > Reader to be at “Near Wave” or “Touch”.

Issue:

Anchor
direct
direct
Name not found by intercom when using Direct Connect

...

  • For Front Desk profiles, ensure the user is part of the Access Group in used for the Routing Profile.

What to check in the Control Center:

...

  • Android (may differ based on version)

    • Notifications must be enabled

    • Openpath Call Notification must be enabled

Iframe
allowfullscreentrue
srchttps://info.openpath.com/hubfs/Openpath/images/kustomer-articles/droid_notifications.png
width246
frameborderhide
titleandroid notifications
alignleft
height547
longdescAndroid Notifications

...

Anchor
video
video
Video not streaming from the intercom/slow connection times or disconnects

What to check:

  • Ensure the internet bandwidth available at the location is enough to support the upload and download speeds required to support the video devices and other communications at that location. Insufficient network bandwidth or Internet bandwidth will result in long video load times and delayed notifications.

  • The recommended upload speeds for 1 Video Reader Pro or Video Intercom Reader Pro.

(Double for each Video Reader and Video Intercom reader added)

  • Quality:

    • Low: 1Mb

    • Medium: 2Mb

    • High: 8Mb

  • Ensure the intercom has internet connectivity, and double-check that the site network is not blocking any of the required ports.

  • To ensure reliable audio and video, we require allowing access to the outbound UDP ports listed below. Additionally, please ensure UDP hole-punching is enabled (or disable symmetric NAT).

    • TCP port 443

    • UDP port 123

    • UDP port 3478 - TURN/UDP servers that assist in establishing connectivity

    • UDP 50000 - 60000 - UDP connection for WebRTC

  • The Video Reader Pro and Video Intercom Reader Pro are best fit for use for answering calls and viewing recorded events. Long-term live viewing is not a recommended use case through the Control Center as the likelihood of bandwidth limitations or network interruptions may cause issues with the viewing experience. An ideal way to utilize the Video Reader Pro and Video Intercom Reader Pro as surveillance devices would be to connect them with an NVR such as the Avigilon Atla Aware platform so live views of multiple cameras can be watched without interruption.

Anchor
lense
lense
Caring for the lenselens

  • To ensure a proper seal is kept around the camera lens, cleaning the lens should be done carefully so as not to damage the rubber gasket. Be sure to avoid using chemical cleaners that may weaken the rubber gasket's seal.
    Do not use microfiber cloths as these may catch on the rubber gasket and could cause the gasket to be pulled out.

\uD83D\uDCCE Related articles

...