Page Comparison

There are two ways to install the Standard Keypad Reader; flush mounted on a single gang box or surface mounted using the provided backplate. The Mullion Keypad Reader can only be surface mounted. It is perfect when space is limited, such as a door frame.

Mounting Instructions

...

...

Standard Keypad Reader Installation - Flush Mount

1. Install a recessed single gang box (D) into the wall.

2. Strip and connect the wires.

3. Use the #6-32 screws (B) to attach the reader (C) to the wall. Do not use the provided back plate for flush mount installations.

4. Snap - on the front cover (A). Do not use adhesive.
   

...

...

Standard Keypad Reader Installation - Surface Mount

1. Attach the back plate to the wall.

   1. On drywall: use wall anchors and appropriate screws.

   2. On a UK single gang box: use four machine screws (not included).

   3. On a German single gang box: use two machine screws (not included) on the top and bottom holes.

2. Strip and connect the wires.

3. Use the #8-32 screws (B) to attach the reader (C) to the back plate.

4. Snap - on the front cover (A). Do not use adhesive.

...

1. Strip and connect the wires.

2. If installing on a metal surface, drill and tap to use the provided machine screws (B). Or, use self-tapping screws.

3. Attach the reader (G) to the wall.

4. Snap - on the front cover (F). Do not use adhesive.

...