...
Attach the back plate to the wall.
On drywall: use wall anchors and appropriate screws.
On a UK single gang box: use four machine screws (not included).
On a German single gang box: use two machine screws (not included) on the top and bottom holes.
Strip and connect the wires.
Use the #8-32 screws (B) to attach the reader (C) to the back plate.
Snap on the front cover (A). Do not use adhesive.
...
| Iframe | ||||
|---|---|---|---|---|
|
...
|
Mullion Keypad Reader Installation
Strip and connect the wires.
If installing on a metal surface, drill and tap to use the provided machine screws (B). Or, use self-tapping screws.
Attach the reader (G) to the wall.
Snap on the front cover (F). Do not use adhesive.
Wiring Information
...
| Iframe | ||||
|---|---|---|---|---|
|
...
|
After installing the Openpath Keypad Reader, check out the How to Program the Openpath Keypad Reader in the Control Center guide to complete the installation.
...