Page Comparison

...

To set up the Openpath integration on the Milestone server:

1. Run the Openpath_ACX_Plugin exe

2. Find the Openpath_ACX exe and run as administrator

3. Change the following settings under Milestone Configuration:

   • Image Modified

     Local port is required, and it must match the port defined in the Milestone Access Control settings

   • Remote host is required, and it must be the IP address of the machine that is running the event server

   • Milestone plugin has two settings, October-2019 or Before October-2019—select the appropriate version for your setup

4. Change the following settings under Openpath Configuration:

   Image Modified

   • User and Pass is required. Enter the login credentials of an Openpath Super Admin user. Openpath recommends creating a dedicated user for this purpose.

5. Click Save then Close

Milestone Management Client Configuration:

1. Go to Site Navigation

   Image Modified

2. Right-click on Access Control and click Create New

   1. Note: Leave User name and Password as the default. Ensure the Port field matches the ACX Plugin.

3. Image Modified

   Click Next and follow the prompts to tie cameras to doors

4. Restart Milestone Event Server, then open Openpath_ACX exe and confirm everything is connected:

...

1. Image Added

   Open XProtect Client. There should be an Access Control tab in the client now, and you can add information to live views as well.

   Image Modified