...
Install a recessed single gang box (D) into the wall
Strip and connect the wires
Use the #6-32 screws (B) to attach the reader (C) to the wall. Do not use the provided back plate for flush mount installations.
Snap-on the front cover (A). Do not use adhesive.
...
Attach the back plate to the wall.
On drywall: use wall anchors and appropriate screws.
On a UK single gang box: use four machine screws (not included).
On a German single gang box: use two machine screws (not included) on the top and bottom holes.
Strip and connect the wires.
Use the #8-32 screws (B) to attach the reader (C) to the back plate.
Snap-on the front cover (A). Do not use adhesive.
...
Strip and connect the wires.
If installing on a metal surface, drill and tap to use the provided machine screws (B). Or, use self-tapping screws.
Attach the reader (G) to the wall.
Snap-on the front cover (F). Do not use adhesive.
...
After installing the Keypad Reader, check out the How to Program the Keypad Reader in the Control Center guide to complete the installation.
Related Articles:
How to create an entry for the Openpath Keypad Reader
How to program the Keypad Reader in the Control Center