Page Comparison

...

1. Disconnect power from the ACU

2. Hold down the ADMIN button for 15 seconds

3. While still holding down the ADMIN button, reconnect the power, and continue to hold the button for another 15 seconds.

   1. If resetting a Core or SDC, the LED will turn solid cyan > solid yellow > solid cyan > solid blue

   2. If resetting a Video Reader, the LED will turn blinking blue > solid yellow > blinking blue > solid blue

   3. If resetting a 4 Door Controller, you should see two POWER LEDs light up in the top left corner

   .

4. Wait 15 minutes before provisioning the ACU

...